MACHS

Technical guides

Choose resin from the actual exposure

Send chemical concentration, temperature and contact conditions before asking which resin is suitable.

MACHS pultruded FRP grating panels in the workshop; representative family photograph, not a tested specimen identification

MACHS supplied workshop photograph of pultruded grating. Representative family photograph; geometry and report applicability require separate verification.

A chemical name or an industry label is not a complete exposure specification. The same site may have process liquids, cleaning chemicals, splashes and outdoor weathering to review.

Related buyer FAQ · Review application conditions · More buying questions

Describe normal operation and cleaning

List the chemical or mixture, concentration, operating and peak temperatures and exposure duration. Distinguish immersion, splashes and intermittent contact. Include cleaning agents and concentrations, rinsing and any unusual process or shutdown conditions.

Keep material evidence tied to its sample

The H30 technical pack includes reports for an identified Bisphenol-A vinyl-ester / VCF configuration. Those tests do not establish resistance to every chemical, concentration or temperature, and do not cover every resin option shown in the catalogue.

Turn the review into an order requirement

State which exposure is controlling and which test method or customer specification must be met. Record the agreed resin/configuration in the quotation and drawing. If the exposure or report scope is incomplete, retain that point as an open technical condition.

Review evidence · Discuss your requirement

Frequently asked questions

Is the chemical name enough to select a resin?

No. Provide concentration, operating and peak temperatures, contact duration and whether exposure is immersion, splash or intermittent. Include cleaning conditions when relevant.

Can a fire-test report establish chemical suitability?

A report supports only its stated method and tested configuration. Ask for the evidence applicable to the actual exposure; do not use an unrelated test result as a resistance approval.

What if the exposure is not fully defined?

Mark the missing conditions and ask for review. Do not guess a resin or treat a general product-family description as approval for an unspecified service environment.

Related technical resources

Related products

MACHS supplied moulded grating representative product-family photograph38 × 38 × 38 mm moulded grating38 mm-deep moulded FRP grating with 38 × 38 mm mesh for walkway and platform selection. Compare resin and surface options, then send panel sizes and support conditions for quotation.MACHS supplied moulded grating representative product-family photographH30 moulded mini-mesh grating30 mm moulded mini-mesh FRP grating for walkway and platform selection. Check the recorded mesh and surface options, then send panel sizes, service conditions and quantities for review.MACHS supplied moulded grating representative product-family photograph60.2 × 76.2 S38 grating panelS38 FRP grating with 60.2 × 76.2 mm pitch for industrial access selection. Check the recorded configuration and sample evidence, then send your panel sizes and support conditions.MACHS supplied pultruded grating representative product-family photographHL-6020 pultruded gratingHL-6020 pultruded FRP grating for industrial walkway selection. Compare the catalogue geometry and bearing direction, then send your span, loads and cut sizes for technical and quotation review.MACHS supplied pultruded grating representative product-family photographHL-5020 pultruded gratingHL-5020 pultruded FRP grating for industrial walkway selection. Compare the catalogue geometry and bearing direction, then send your span, loads and cut sizes for technical and quotation review.MACHS supplied pultruded grating representative product-family photographHL-4020 pultruded gratingHL-4020 pultruded FRP grating for industrial walkway selection. Compare the catalogue geometry and bearing direction, then send your span, loads and cut sizes for technical and quotation review.MACHS supplied pultruded grating representative product-family photographT-3320 pultruded gratingT-3320 pultruded FRP grating for industrial walkway selection. Compare the catalogue geometry and bearing direction, then send your span, loads and cut sizes for technical and quotation review.MACHS supplied pultruded grating representative product-family photographI6015 pultruded gratingI6015 pultruded FRP grating for walkways and equipment access. Compare the recorded geometry and sample-report scope, then send your span, load conditions and cut sizes for quotation review.MACHS supplied pultruded grating representative product-family photographT5020 pultruded gratingT5020 pultruded FRP grating for walkway and platform selection. Check the catalogue geometry and separate report scope, then send your support layout, cut sizes and required surface for review.MACHS supplied moulded grating representative product-family photograph50 × 50 × 50 mm moulded grating50 mm-deep moulded FRP grating with 50 × 50 mm mesh for platform selection. Review the sample load conditions, then send your span, loads and panel sizes for configuration review.Green micro-mesh grating photograph from the supplied MACHS archive13/40 mm mesh, 30 mm moulded grating30 mm moulded FRP grating with 13/40 mm mesh for walkway selection. Check the recorded surface and sample-specific slip report, then send your application and panel requirements.

Your enquiry brief

Application:

Chemicals/mixtures and concentrations:

Operating/peak temperatures:

Immersion, splash or intermittent contact and duration:

Cleaning chemicals and cycle:

Model, surface and quantity:

Required test/specification and destination:

Ready to discuss this requirement?

Carry this checklist into the enquiry form, fill in what you know and mark unresolved items for review.

Use this brief in your enquiry