MACHS

Technical resources

Explore technical resources by project requirement.

Technical documents & report matchingFind evidence for the configuration you are considering.Your quotation checklistBring the inputs needed for a useful quotation.Section drawings, report relationships and unresolved geometryCheck catalogue section identity, held drawing candidates and the exact information still required before order or evidence release.

Section drawings and unresolved model relationships →

Historical expired certificates, superseded versions and customer-headed references →

Choose the engineering question

Recorded documents and configuration references

Reports describe tested samples. They do not establish blanket certification, interchangeability or allowable working loads.

101490735SAT-001A

FRP pultruded grating — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: FRP pultruded grating.

ASTM E84-13a · 2014-01-15 · As issued; see original · Sample report; not a product certification

I6015 pultruded grating

Read document scope and preview

260811011SHF-002

T5020;拉挤格栅;约50mm厚 — T5020, approximately 50 mm sample. FSI 40 / SDI 1000; does not support a Class A claim. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.

ASTM E84-26a · 2026-08-26 · As issued; see original · Sample report; not a product certification

T5020 pultruded grating

Read document scope and preview

260811011SHF-001

13×13/40×40;30mm;湿态摆锤 — 13/40 mm mesh, 30 mm, 6 #big tested surface; wet pendulum AS 4586 Appendix A. P5 applies to that tested sample/surface only. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.

AS 4586-2013/Amdt 1-2017 Appendix A · 2026-08-20 · As issued; see original · Sample report; not a product certification

13/40 mm mesh, 30 mm moulded grating

Read document scope and preview

SHIN2009059850CM

50 × 50 × 50 mm; opening 350 mm — Do not substitute for a different opening or span.

Conditional load test · 2020-09-27 · As issued; see original · Sample record — applicability review required

50 × 50 × 50 mm moulded grating

Original held for release / applicability review.

101490735SAT-001B

FRP molded grating — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: FRP molded grating.

ASTM E84-13a · 2014-01-15 · As issued; see original · Sample report; not a product certification

38 × 38 × 38 mm moulded grating

Read document scope and preview

CBT30406071087

Bisphenol-A vinyl ester; 38x38/19x19; 30mm — Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.

ASTM D543-21 / ASTM C581 · 2026-04-29 · As issued; see original · Sample report; not a product certification

H30 moulded mini-mesh grating

Read document scope and preview

CBT30406071086

Bisphenol-A vinyl ester; 19x19/38x38; 30mm — Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.

多项机械性能方法(见报告) · 2026-01-30 · As issued; see original · Sample report; not a product certification

H30 moulded mini-mesh grating

Read document scope and preview

CBT30406071089

VCF 38x38/19x19; 30mm — Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.

ISO 9227:2022 salt spray · 2026-04-29 · As issued; see original · Sample report; not a product certification

H30 moulded mini-mesh grating

Read document scope and preview

CBT30406071088

VCF 38x38/19x19; 30mm — Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.

企业方法 FRP-G-DWI-01;参考 ASTM D7136/D5628/F3059 · 2026-03-29 · As issued; see original · Sample report; not a product certification

H30 moulded mini-mesh grating

Read document scope and preview

210624007SHF-005

38S38; 38mm; P5; VE/ISO; sample FRP GRATING 1003 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38S38; 38mm; P5; VE/ISO; sample FRP GRATING 1003. P5 is part of the recorded product code here, not a slip rating.

ASTM E84-21 · 2021-07-14 · As issued; see original · Sample report; not a product certification

38 × 38 × 38 mm moulded grating

Read document scope and preview

210624007SHF-006

38S38; 38mm; P5; VE/ISO; sample FRP GRATING 7035 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38S38; 38mm; P5; VE/ISO; sample FRP GRATING 7035. P5 is part of the recorded product code here, not a slip rating.

ASTM E84-21 · 2021-07-14 · As issued; see original · Sample report; not a product certification

38 × 38 × 38 mm moulded grating

Read document scope and preview

210624007SHF-007

FRP GRATING 6001; 38s38 38/p5 Ve/iso; smooth. Inventory transcription 7035 conflicts with the original. — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38S38; 38mm; P5; VE/ISO; sample FRP GRATING 6001. P5 is part of the recorded product code here, not a slip rating. Product identifier is retained as printed; catalogue/summary labels differ and must not be silently harmonised. Original sample name is 6001; inventory transcription 7035 conflicts with the original and is not adopted.

ASTM E84-21 · 2021-07-14 · As issued; see original · Sample report; not a product certification

38 × 38 × 38 mm moulded grating

Read document scope and preview

SDFTS25000933R01_EN

38×38×38mm FRP grating; Sample 1 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38×38×38mm FRP grating; Sample 1.

ASTM E84-24 · 2025-03-06 · As issued; see original · Sample report; not a product certification

38 × 38 × 38 mm moulded grating

Read document scope and preview

SDFTS25000936R01_EN

38×38×38mm FRP grating; Sample 3 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38×38×38mm FRP grating; Sample 3.

ASTM E84-24 · 2025-03-06 · As issued; see original · Sample report; not a product certification

38 × 38 × 38 mm moulded grating

Read document scope and preview

SDFTS25000938R01_EN

38×38×38mm FRP grating; Sample 4 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38×38×38mm FRP grating; Sample 4.

ASTM E84-24 · 2025-03-06 · As issued; see original · Sample report; not a product certification

38 × 38 × 38 mm moulded grating

Read document scope and preview

SDFTS25000940R01_EN

38×38×38mm FRP grating; Sample 5 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38×38×38mm FRP grating; Sample 5.

ASTM E84-24 · 2025-03-06 · As issued; see original · Sample report; not a product certification

38 × 38 × 38 mm moulded grating

Read document scope and preview

190325002SHF-001

38×38mm;38mm厚;FRP molded grating — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38×38mm;38mm厚;FRP molded grating.

ASTM E84-19 · 2019-04-15 · As issued; see original · Sample report; not a product certification

38 × 38 × 38 mm moulded grating

Read document scope and preview

English product catalogue

Product families and catalogue configurations — Historical catalogue reference; not a test report, certification, current stock statement or approved order drawing. Catalogue mass and load-table discrepancies require review.

Product reference · · Filename includes 2023; approved issue/revision date not verified · Catalogue reference — order applicability review required

I6015 pultruded grating T5020 pultruded grating T-3320 pultruded grating HL-4020 pultruded grating HL-5020 pultruded grating HL-6020 pultruded grating C25 FRP c-channel — 25 × 14 × 3 × 3 mm C26 FRP c-channel — 26 × 18 × 3.2 × 3.2 mm C31 FRP c-channel — 31 × 23 × 4 × 4 mm C32 FRP c-channel — 32 × 13 × 3 × 3 mm C33 FRP c-channel — 33 × 29 × 4 × 4 mm C36 FRP c-channel — 36 × 30 × 4 × 4 mm C40 FRP c-channel — 40 × 24 × 3.2 × 3.2 mm C45 FRP c-channel — 45 × 28 × 6.4 × 6.4 mm C50A FRP c-channel — 50 × 14 × 3.2 × 3.2 mm C50B FRP c-channel — 50 × 30 × 5 × 5 mm C52 FRP c-channel — 52 × 50 × 6 × 6 mm C60A FRP c-channel — 60 × 50 × 5 × 5 mm C70 FRP c-channel — 70 × 30 × 4.5 × 4.5 mm C75 FRP c-channel — 75 × 35 × 5 × 5 mm C76A FRP c-channel — 76 × 22 × 6.4 × 6.4 mm C76B FRP c-channel — 76 × 38 × 6.4 × 6.4 mm C80A FRP c-channel — 80 × 40 × 10 × 10 mm C90A FRP c-channel — 90 × 35 × 5 × 5 mm C90B FRP c-channel — 90 × 35 × 8 × 8 mm C90C FRP c-channel — 90 × 50 × 6 × 6 mm C101.6A FRP c-channel — 101.6 × 28.5 × 6.35 × 6.35 mm C102A FRP c-channel — 102 × 27 × 3.2 × 3.2 mm C102B FRP c-channel — 102 × 29 × 4.8 × 4.8 mm C102C FRP c-channel — 102 × 30 × 4 × 4 mm C102E FRP c-channel — 102 × 44 × 4.8 × 4.8 mm C102F FRP c-channel — 102 × 44 × 6.4 × 6.4 mm C102H FRP c-channel — 102 × 35 × 4.8 × 4.8 mm C102G FRP c-channel — 102 × 35 × 6.35 × 6.35 mm C117 FRP c-channel — 117 × 85 × 5 × 5 mm C120A FRP c-channel — 120 × 25 × 5 × 5 mm C120B FRP c-channel — 120 × 30 × 5 × 5 mm C120C FRP c-channel — 120 × 40 × 5 × 5 mm C127A FRP c-channel — 127 × 34.5 × 6.35 × 6.35 mm C127B FRP c-channel — 127 × 70 × 8 × 8 mm C145 FRP c-channel — 145 × 25 × 5 × 5 mm C150A FRP c-channel — 150 × 100 × 6.4 × 6.4 mm C150B FRP c-channel — 150 × 80 × 10 × 10 mm C152A FRP c-channel — 152 × 42 × 4.8 × 4.8 mm C152B FRP c-channel — 152 × 42 × 6.4 × 6.4 mm C152C FRP c-channel — 152 × 42 × 8 × 8 mm C152D FRP c-channel — 152 × 42 × 9.5 × 9.5 mm C152E FRP c-channel — 152 × 51 × 9.5 × 9.5 mm C160 FRP c-channel — 160 × 48 × 8 × 8 mm C203A FRP c-channel — 203 × 56 × 6.4 × 6.4 mm C203B FRP c-channel — 203 × 56 × 9.5 × 9.5 mm C203C FRP c-channel — 203 × 102 × 12.7 × 12.7 mm C203D FRP c-channel — 203 × 102 × 6.5 × 6.5 mm C210A FRP c-channel — 210 × 55 × 5 × 5 mm C210B FRP c-channel — 210 × 80 × 5 × 5 mm C210C FRP c-channel — 210 × 85 × 5 × 5 mm C240A FRP c-channel — 240 × 72 × 8 × 8 mm C240B FRP c-channel — 240 × 115 × 5 × 5 mm C249A FRP c-channel — 249 × 151 × 4.76 × 4.76 mm C249B FRP c-channel — 249 × 201.6 × 4.76 × 4.76 mm C254 FRP c-channel — 254 × 70 × 12.7 × 12.7 mm C263A FRP c-channel — 263 × 157 × 4.76 × 4.76 mm C263B FRP c-channel — 263 × 208 × 4.76 × 4.76 mm C292 FRP c-channel — 292 × 70 × 12.7 × 12.7 mm C300 FRP c-channel — 300 × 55 × 5 × 5 mm C305A FRP c-channel — 305 × 76.2 × 12.7 × 12.7 mm C310A FRP c-channel — 310 × 115 × 5 × 5 mm C356 FRP c-channel — 356 × 89 × 19 × 19 mm C381 FRP c-channel — 381 × 90 × 10 × 10 mm C436 FRP c-channel — 436 × 90 × 10 × 10 mm C491 FRP c-channel — 491 × 90 × 12 × 12 mm C610 FRP c-channel — 610 × 76 × 6.4 × 6.4 mm C902 FRP c-channel — 902 × 100 × 10 × 10 mm C970 FRP c-channel — 970 × 40 × 10 × 10 mm ST25A FRP square tube — 25 × 25 × 3.2 × 3.2 mm ST25B FRP square tube — 25 × 25 × 6.4 × 6.4 mm ST32A FRP square tube — 32 × 32 × 3.2 × 3.2 mm ST32B FRP square tube — 32 × 32 × 6.4 × 6.4 mm ST38A FRP square tube — 38 × 38 × 3.2 × 3.2 mm ST38B FRP square tube — 38 × 38 × 5 × 5 mm ST38C FRP square tube — 38 × 38 × 6.4 × 6.4 mm ST44A FRP square tube — 44 × 44 × 3.2 × 3.2 mm ST44B FRP square tube — 44 × 44 × 6.4 × 6.4 mm ST50A FRP square tube — 50 × 50 × 3.2 × 3.2 mm ST50B FRP square tube — 50 × 50 × 3.5 × 3.5 mm ST50C FRP square tube — 50 × 50 × 4 × 4 mm ST50D FRP square tube — 50 × 50 × 5 × 5 mm ST50E FRP square tube — 50 × 50 × 6.4 × 6.4 mm ST54A FRP square tube — 54 × 54 × 3.2 × 3.2 mm ST54B FRP square tube — 54 × 54 × 4.8 × 4.8 mm ST60A FRP square tube — 60 × 60 × 5 × 5 mm ST64A FRP square tube — 64 × 64 × 3.2 × 3.2 mm ST64B FRP square tube — 64 × 64 × 4.4 × 4.4 mm ST64C FRP square tube — 64 × 64 × 6.4 × 6.4 mm ST76A FRP square tube — 76 × 76 × 3.2 × 3.2 mm ST76B FRP square tube — 76 × 76 × 5 × 5 mm ST76C FRP square tube — 76 × 76 × 6.4 × 6.4 mm ST76D FRP square tube — 76 × 76 × 9.5 × 9.5 mm ST89A FRP square tube — 89 × 89 × 6.4 × 6.4 mm ST90A FRP square tube — 90 × 90 × 5 × 5 mm ST90B FRP square tube — 90 × 90 × 6.4 × 6.4 mm ST100A FRP square tube — 100 × 100 × 10 × 10 mm ST101A FRP square tube — 101 × 101 × 3.2 × 3.2 mm ST101B FRP square tube — 101 × 101 × 5 × 5 mm ST101C FRP square tube — 101 × 101 × 6.4 × 6.4 mm ST101D FRP square tube — 101 × 101 × 8 × 8 mm ST125A FRP square tube — 125 × 125 × 6.4 × 6.4 mm ST125B FRP square tube — 125 × 125 × 8 × 8 mm ST152A FRP square tube — 152 × 152 × 6.4 × 6.4 mm ST152B FRP square tube — 152 × 152 × 9.5 × 9.5 mm ST152C FRP square tube — 152 × 152 × 12.7 × 12.7 mm EL25A FRP angle — 25 × 25 × 3.2 × 3.2 mm EL25B FRP angle — 25 × 25 × 6.4 × 6.4 mm EL30B FRP angle — 30 × 25 × 5 × 5 mm EL32 FRP angle — 32 × 32 × 4 × 4 mm EL38A FRP angle — 38 × 38 × 5 × 5 mm EL38B FRP angle — 38 × 38 × 6.4 × 6.4 mm EL45 FRP angle — 45 × 45 × 4.8 × 4.8 mm EL50A FRP angle — 50 × 50 × 3.2 × 3.2 mm EL50B FRP angle — 50 × 50 × 6.4 × 6.4 mm EL50.8 FRP angle — 50.8 × 50.8 × 4 × 4 mm EL60 FRP angle — 60 × 60 × 9 × 9 mm EL76A FRP angle — 76 × 76 × 4.8 × 4.8 mm EL76B FRP angle — 76 × 76 × 6.4 × 6.4 mm EL76C FRP angle — 76 × 76 × 9.5 × 9.5 mm EL76D FRP angle — 76 × 76 × 12.7 × 12.7 mm EL101A FRP angle — 101 × 101 × 6.4 × 6.4 mm EL101B FRP angle — 101 × 101 × 8 × 8 mm EL101C FRP angle — 101 × 101 × 9.5 × 9.5 mm EL101D FRP angle — 101 × 101 × 12.7 × 12.7 mm EL152A FRP angle — 152 × 152 × 6.4 × 6.4 mm EL152B FRP angle — 152 × 152 × 9.5 × 9.5 mm EL152C FRP angle — 152 × 152 × 12.7 × 12.7 mm L40 FRP angle — 40 × 22 × 4 × 4 mm L50 FRP angle — 50 × 40 × 6.35 × 6.35 mm L76 FRP angle — 76 × 15 × 6 × 6 mm L100 FRP angle — 100 × 50 × 6.4 × 6.4 mm L145 FRP angle — 145 × 76 × 10 × 10 mm L170 FRP angle — 170 × 76 × 9.5 × 9.5 mm L180 FRP angle — 180 × 30 × 8 × 8 mm L254 FRP angle — 254 × 40 × 6.4 × 6.4 mm IB32 FRP i-beam — 15 × 32 × 4.4 × 4 mm IB38A FRP i-beam — 30 × 38 × 4 × 4 mm IB50A FRP i-beam — 50 × 102 × 6.4 × 6.4 mm IB50B FRP i-beam — 50 × 102 × 8 × 8 mm IB70 FRP i-beam — 70 × 140 × 6.35 × 6.35 mm IB76A FRP i-beam — 76 × 152 × 6.4 × 6.4 mm IB76B FRP i-beam — 76 × 152 × 9.5 × 9.5 mm IB100 FRP i-beam — 100 × 75 × 6 × 6 mm IB102A FRP i-beam — 102 × 203 × 9.5 × 9.5 mm IB102B FRP i-beam — 102 × 203 × 12.7 × 12.7 mm IB120 FRP i-beam — 120 × 240 × 12 × 12 mm IB127A FRP i-beam — 127 × 254 × 9.5 × 9.5 mm IB127B FRP i-beam — 127 × 254 × 12.7 × 12.7 mm IB127C FRP i-beam — 127 × 152 × 9.5 × 9.5 mm IB127D FRP i-beam — 127 × 152 × 12.7 × 12.7 mm IB152A FRP i-beam — 152 × 305 × 9.5 × 9.5 mm IB152B FRP i-beam — 152 × 305 × 12.7 × 12.7 mm HB76 FRP h-beam — 76 × 76 × 6.4 × 6.4 mm HB102A FRP h-beam — 102 × 102 × 6.4 × 6.4 mm HB102B FRP h-beam — 102 × 102 × 8 × 8 mm HB152A FRP h-beam — 152 × 152 × 6.4 × 6.4 mm HB152B FRP h-beam — 152 × 152 × 9.5 × 9.5 mm HB203A FRP h-beam — 203 × 203 × 9.5 × 9.5 mm HB203B FRP h-beam — 203 × 203 × 12.7 × 12.7 mm HB254A FRP h-beam — 254 × 254 × 9.5 × 9.5 mm HB254B FRP h-beam — 254 × 254 × 12.7 × 12.7 mm HB305 FRP h-beam — 305 × 305 × 12.7 × 12.7 mm CT32A FRP plum-flower tube — 19 × 32 × 6.4 mm CT32B FRP plum-flower tube — 25 × 32 × 3.5 mm CT32C FRP plum-flower tube — 22 × 32 × 5 mm CT34A FRP plum-flower tube — 19 × 34 × 7.5 mm CT37.5 FRP plum-flower tube — 37.5 × 21.5 × 8 mm CT42 FRP plum-flower tube — 29 × 42 × 6.4 mm CT45A FRP plum-flower tube — 28 × 45 × 8.5 mm CT45B FRP plum-flower tube — 32 × 45 × 6.4 mm CT51 FRP plum-flower tube — 51 × 36 × 7 mm CT90A FRP plum-flower tube — 71 × 90 × 9.5 mm M2 FRP skirtboard — 100 × 13 × 3.2 mm M3 FRP skirtboard — 100 × 16 × 5 mm M4 FRP skirtboard — 148 × 12 × 4 mm M5 FRP skirtboard — 148 × 12 × 3 mm W1 FRP skirtboard — 100 × 19 × 5 mm W2 FRP skirtboard — 100 × 15 × 3.2 mm W3 FRP skirtboard — 150 × 16 × 3.2 mm W4 FRP skirtboard — 200 × 14 × 3 mm RT25 FRP circular tube — 25 × 3.2 mm RT32A FRP circular tube — 32 × 3.2 mm RT32B FRP circular tube — 32 × 5 mm RT35A FRP circular tube — 35 × 2.5 mm RT38A FRP circular tube — 38 × 3.2 mm RT38B FRP circular tube — 38 × 4 mm RT38C FRP circular tube — 38 × 5 mm RT38D FRP circular tube — 38 × 6.4 mm RT42A FRP circular tube — 42 × 3.2 mm RT42B FRP circular tube — 42 × 5 mm RT48 FRP circular tube — 48 × 6.4 mm RT50A FRP circular tube — 50 × 3.2 mm RT50B FRP circular tube — 50 × 4 mm RT50C FRP circular tube — 50 × 5 mm RT50D FRP circular tube — 50 × 6.4 mm RT60 FRP circular tube — 60 × 4.5 mm RT50.8 FRP circular tube — 50.8 × 6.4 mm RT64A FRP circular tube — 64 × 3.5 mm RT64B FRP circular tube — 64 × 7 mm RT76 FRP circular tube — 76 × 6.4 mm RT89A FRP circular tube — 89 × 3.2 mm RT89B FRP circular tube — 89 × 5 mm RT89C FRP circular tube — 89 × 6.4 mm RT99 FRP circular tube — 99 × 5 mm RT100 FRP circular tube — 100 × 4.5 mm RT101 FRP circular tube — 101 × 6.4 mm RT114A FRP circular tube — 114 × 3.2 mm RT114B FRP circular tube — 114 × 5 mm RT114C FRP circular tube — 114 × 6.4 mm RT114D FRP circular tube — 114 × 9.5 mm RT140 FRP circular tube — 140 × 3 mm RT150A FRP circular tube — 150 × 3.2 mm RT150B FRP circular tube — 150 × 5 mm RT150C FRP circular tube — 150 × 6.4 mm RT150D FRP circular tube — 150 × 9.5 mm FP32A FRP flat plank — 3.2 × 1000 mm FP32B FRP flat plank — 3.2 × 1220 mm FP40A FRP flat plank — 4 × 800 mm FP40B FRP flat plank — 4 × 1200 mm FP48A FRP flat plank — 4.8 × 1000 mm FP50A FRP flat plank — 5 × 440 mm FP50B FRP flat plank — 5 × 1220 mm FP64A FRP flat plank — 6.4 × 1220 mm FP95A FRP flat plank — 9.5 × 1220 mm FP127A FRP flat plank — 12.7 × 1220 mm FP160A FRP flat plank — 16 × 1220 mm FP190A FRP flat plank — 19 × 1220 mm FP254A FRP flat plank — 25.4 × 1220 mm FS19A FRP flat lath — 19 × 6.4 mm FS19B FRP flat lath — 19 × 22 mm FS24A FRP flat lath — 24.6 × 3.4 mm FS25A FRP flat lath — 25.4 × 8 mm FS30A FRP flat lath — 30 × 3 mm FS30B FRP flat lath — 30 × 6.4 mm FS35A FRP flat lath — 35 × 8 mm FS38A FRP flat lath — 38 × 5 mm FS38B FRP flat lath — 38 × 8 mm FS38C FRP flat lath — 38 × 15 mm FS40A FRP flat lath — 40 × 8 mm FS40B FRP flat lath — 40 × 10 mm FS46A FRP flat lath — 46 × 6.4 mm FS50A FRP flat lath — 50 × 2 mm FS50B FRP flat lath — 50 × 4 mm FS50C FRP flat lath — 50 × 6 mm FS50D FRP flat lath — 50 × 8 mm FS50E FRP flat lath — 50 × 15 mm FS50F FRP flat lath — 50 × 25 mm FS60A FRP flat lath — 60 × 2 mm FS60B FRP flat lath — 60 × 4 mm FS64A FRP flat lath — 64 × 4.8 mm FS64B FRP flat lath — 64 × 15 mm FS70A FRP flat lath — 70 × 4 mm FS76A FRP flat lath — 76 × 9.5 mm FS76B FRP flat lath — 76 × 14 mm FS100A FRP flat lath — 100 × 10 mm FS100B FRP flat lath — 100 × 25 mm FS102B FRP flat lath — 102 × 5 mm FS102C FRP flat lath — 102 × 6.4 mm FS120A FRP flat lath — 120 × 10 mm FS127A FRP flat lath — 127 × 6.4 mm FS152A FRP flat lath — 152 × 10 mm FS152B FRP flat lath — 152 × 20 mm FS190A FRP flat lath — 190 × 15 mm FS250A FRP flat lath — 250 × 12 mm FT50A FRP rectangular tube — 50 × 25 × 3 × 3 mm FT50B FRP rectangular tube — 50 × 25 × 6.4 × 6.4 mm FT52 FRP rectangular tube — 52 × 32 × 5 × 5 mm SSR25 FRP solid square rod — 25 × 25 mm SSR32 FRP solid square rod — 32 × 32 mm SSR38 FRP solid square rod — 38 × 38 mm SRR95 FRP solid round rod — 9.5 mm SRR127 FRP solid round rod — 12.7 mm SRR254 FRP solid round rod — 25.4 mm SRR318 FRP solid round rod — 31.8 mm SRR380 FRP solid round rod — 38 mm FS280A FRP flat strip — 280 × 10 mm FS300A FRP flat strip — 300 × 24 mm FS355A FRP flat strip — 35.5 × 5 mm FS555A FRP flat strip — 555 × 5 mm FS751A FRP flat strip — 751 × 5 mm FS762A FRP flat strip — 762 × 9.5 mm FS70 FRP chamfered flat strip — 70 × 4 mm FS90A FRP chamfered flat strip — 90 × 3.2 mm FS120 FRP chamfered flat strip — 120 × 3 mm

Read document scope and preview

I6015拉挤格栅图纸-模型 · afedb18c

6000 ± 3 × 1000 ± 3 mm panel; nominal depth 38 ± 1 mm — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.

Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor

I6015 pultruded grating

Original held for release / applicability review.

I6015拉挤格栅图纸-模型(1) · b1a6a575

6100 ± 3 × 1000 ± 3 mm panel; nominal depth 38 ± 1 mm — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.

Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor

I6015 pultruded grating

Original held for release / applicability review.

I6015 拉挤格栅图纸 · e298bb46

830 × 591 mm fabricated cut panel; nominal depth 38 mm — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.

Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor

I6015 pultruded grating

Original held for release / applicability review.

T5020%20covering · b69ae766

Covering/fabrication drawing; not the bare E84 specimen — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Covered/fabricated assembly is not established as the bare T5020 E84 specimen. Missing controlled section/BOM, resin/surface traceability, current model mapping and external release. Reconcile manual depth 51 mm with the report nominal 50 mm; this covering drawing is not evidence that the complete assembly was fire-tested.

Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor

T5020 pultruded grating

Original held for release / applicability review.

50X50S50 格栅图纸 · 7034c456

3007 ± 3 × 1007 ± 3 mm panel; 50 mm pitch; 50 ± 1 mm depth — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Two different panel layouts share A0. Neither is established as the 1230×450×50 mm CO350 test component, its support assembly or a current released order drawing. Neither panel drawing identifies the 1230 × 450 × 50 mm / CO350 tested component; do not infer load or A15 applicability.

Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor

50 × 50 × 50 mm moulded grating

Original held for release / applicability review.

50X50S50 格栅图纸 · e6ac0522

1007 ± 3 × 1007 ± 3 mm panel; 50 mm pitch; 50 ± 1 mm depth — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Two different panel layouts share A0. Neither is established as the 1230×450×50 mm CO350 test component, its support assembly or a current released order drawing. Neither panel drawing identifies the 1230 × 450 × 50 mm / CO350 tested component; do not infer load or A15 applicability.

Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor

50 × 50 × 50 mm moulded grating

Original held for release / applicability review.

Files and media

MACHS factory photograph

MACHS factory photograph

User-supplied original. Workshop/site evidence, not a named customer installation.

Download image (JPG)

MACHS molded photograph

MACHS molded photograph

User-supplied original. Workshop/site evidence, not a named customer installation.

Download image (JPG)

MACHS profiles photograph

MACHS profiles photograph

User-supplied original. Workshop/site evidence, not a named customer installation.

Download image (JPG)

MACHS platform photograph

MACHS platform photograph

User-supplied original. Workshop/site evidence, not a named customer installation.

Download image (JPG)

MACHS entrance photograph

MACHS entrance photograph

User-supplied original. Workshop/site evidence, not a named customer installation.

Download image (JPG)

Pultruded flat bars — supplied archive photograph

Supplied archive photograph of pultruded flat bars with example drilled holes

MACHS supplied archive I0537. Flat-bar family photograph only; pictured holes, sizes, colours and materials are not an approved order specification. Confirm the finished drawing and revision.

Download image (JPG)

FRP rods & flat bars