I6015 pultruded FRP grating for walkways and equipment access. Compare the recorded geometry and sample-report scope, then send your span, load conditions and cut sizes for quotation review.
Representative pultruded grating photograph from the MACHS supplied archive. Confirm the exact geometry, dimensions, resin and surface against the approved order drawing; the photograph is not evidence of the tested configuration.← Pultruded grating
Specification notes
Model
I6015
Depth
38 mm (report sample)
Resin
Isophthalic (report sample)
Parameter source: P02 → sample N013 / V9 2026-11-05 / V8 R3. Only the listed configuration is described. Missing dimensions, mass and working loads are not estimated.
I6015: from specification to a quotation-ready brief
Use these questions to shortlist the configuration, check its evidence and prepare the information needed for a useful quotation. Unresolved conditions stay open for review.
Product details
Is the listed geometry a possible match?
Check I6015’s catalogue geometry, bearing direction and recorded sample configuration. Confirm the ordered dimensions, resin and surface against the drawing before choosing.
Start with supports, clear span, load type and deflection criteria. Match each original report to its named sample and distinguish candidate drawings from an approved order drawing.
Compare I6015 and T5020 using the same project conditions. The recorded 38 mm and 50 mm sample depths do not establish which option meets your load requirement or make the products interchangeable.
Use the industrial-platform guide to identify the access task, supports, exposure and installation responsibilities. Review suitability against your project drawing; an application scenario is not a completed-project approval.
Review the published manufacturing and delivery scope, then agree fabrication, inspection, identification and packing for the actual order. Company information and model-specific test reports answer different questions.
Prepare sizes, quantities, drawing revision, resin and surface, supports and loads, destination and required documents. Use a common checklist so quotations cover the same supply scope.
The recorded report sample is pultruded grating, 38 mm deep, with isophthalic resin. Confirm the bearing-bar spacing, cross-bar arrangement, panel dimensions and support direction against the order drawing; these details are not established by the I6015 name alone.
Use the correct report, not a similar code
The 2014 original is linked in the technical pack. The separately recorded I38 (I-6015) profile report has not been confirmed as the same product and is not used here as replacement evidence. Send the required fire-test method and the proposed configuration for review.
Prepare the selection brief
Include support centres and clear span, bearing direction, distributed or concentrated loading, load contact area, allowable deflection and service exposure. State whether you need full panels or cut parts, and which drawings and reports must accompany the supply.
How to specify this grating
Start with a plan showing the supporting members and the bearing bars. Pultruded bearing bars carry the principal load in their longitudinal direction; panel orientation and cut-outs must therefore be reviewed with the supports. A matching depth or model name alone does not establish interchangeable performance.
Application and supply scope
This configuration can be considered during the selection of industrial walkways, access platforms or equipment access areas. These are selection scenarios, not a claim that every installation is approved. Confirm personnel or equipment loads, wet or contaminated conditions, chemical exposure, temperature, fire requirements and the governing project specification.
Catalogue dimensions versus an approved order
The table below transcribes the supplied English catalogue, PDF 18 / printed 33; PDF 20 / printed 38. It is a catalogue reference, not an approved order drawing or confirmation of current stock. Existing V9 and original-report sample identities remain unchanged. Values not confirmed by an approved drawing must be reviewed before ordering; catalogue weight discrepancies are retained rather than silently corrected.
Surface, cutting and installation decisions
Specify the walking surface separately from the bearing-bar geometry: smooth, gritted, grooved or covered configurations require their own confirmation. State the panel outline, cut-outs, edge treatment, fixing positions, support contact and whether supply is full panels or cut parts. Neither a surface photograph nor the word anti-slip establishes a particular slip rating.
What a useful quotation should include
Provide the model or referenced section, drawing number and revision, panel or cut-part quantities, finished sizes and units, required resin and surface, support layout, loads and deflection criteria, destination and required documents. Mark undecided items for review. Confirm whether clips, fabrication, inspection records and packing are included so quotations cover the same scope.
Swipe or scroll the table horizontally to read all columns on a small screen.
Supplied catalogue reference — order review required
Item
Catalogue entry
Use condition
Catalogue designation
I-6015
Do not merge a similar profile/report code automatically
Reference only; confirm configuration and revision
Source
PDF 18 / printed 33; PDF 20 / printed 38
2023 Machs English version Catalog.pdf; filename is not an approved revision date
Can I use the catalogue maximum load as the working load?
No. A maximum or ultimate load is not an allowable working load. Match the exact section and support condition, distinguish line and distributed loading, and agree the design method, load factors and deflection limit with the project engineer. Unverified catalogue load values are not a project design release.
Does the linked fire report cover every resin and surface?
No. Check the named specimen, formulation, thickness, surface and test method in the complete original. A similarly named profile, customer reissue or different resin does not automatically extend the tested scope.
Technical pack for this configuration
Use the model, drawing revision and tested conditions together. Missing files are not evidence of a verified specification.
Specification: recorded parameters on this page; dimensions not listed require drawing review.
Model drawing and revision: no released model drawing is linked in this local catalogue. Request the applicable drawing.
Load / span: no general allowable-load table is released here. Confirm support, span, load direction and deflection criteria.
101490735SAT-001A
FRP pultruded grating
Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: FRP pultruded grating.
Applicant / publisher: Nantong Machs Composite Material Co., Ltd. (as recorded in original) · Source: MACHS original sample report
Version: As issued; see original · Sample report; not a product certification
Historical catalogue reference; not a test report, certification, current stock statement or approved order drawing. Catalogue mass and load-table discrepancies require review.
Applicant / publisher: Publisher identified in the catalogue: MACHS · Source: Document reference
Version: Filename includes 2023; approved issue/revision date not verified · Catalogue reference — order applicability review required
Reference / method: Product reference · Issued: See original
Use current website contact details and V9 company facts. Catalogue material, load and fire claims do not replace matched original reports or project engineering.
Drawing candidate: identity confirmed; order and report applicability NOT confirmed.
I6015拉挤格栅图纸-模型 · afedb18c
6000 ± 3 × 1000 ± 3 mm panel; nominal depth 38 ± 1 mm
Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.
Version: A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor
Reference / method: Drawing reference — not a test report · Issued: See original
Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.
Original is held for release / applicability review.
Drawing candidate: identity confirmed; order and report applicability NOT confirmed.
I6015拉挤格栅图纸-模型(1) · b1a6a575
6100 ± 3 × 1000 ± 3 mm panel; nominal depth 38 ± 1 mm
Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.
Version: A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor
Reference / method: Drawing reference — not a test report · Issued: See original
Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.
Original is held for release / applicability review.
Drawing candidate: identity confirmed; order and report applicability NOT confirmed.
I6015 拉挤格栅图纸 · e298bb46
830 × 591 mm fabricated cut panel; nominal depth 38 mm
Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.
Version: A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor
Reference / method: Drawing reference — not a test report · Issued: See original
Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.
Original is held for release / applicability review.