SHCCM150702189
38 × 38 × 38 mm; 1220 mm span — Sample-specific load evidence; uniform load is total kN, not kN/m².
Load test · 2015-07-24 · As issued; see original · Sample record — applicability review required
38 × 38 × 38 mm moulded grating
Explore technical resources by project requirement.
Section drawings and unresolved model relationships →
Historical expired certificates, superseded versions and customer-headed references →
No matched document is recorded for this search. Missing evidence is not a verified specification. Request the applicable technical files.
Reports describe tested samples. They do not establish blanket certification, interchangeability or allowable working loads.
38 × 38 × 38 mm; 1220 mm span — Sample-specific load evidence; uniform load is total kN, not kN/m².
Load test · 2015-07-24 · As issued; see original · Sample record — applicability review required
38 × 38 × 38 mm moulded gratingFRP pultruded grating — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: FRP pultruded grating.
ASTM E84-13a · 2014-01-15 · As issued; see original · Sample report; not a product certification
I6015 pultruded gratingT5020;拉挤格栅;约50mm厚 — T5020, approximately 50 mm sample. FSI 40 / SDI 1000; does not support a Class A claim. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.
ASTM E84-26a · 2026-08-26 · As issued; see original · Sample report; not a product certification
T5020 pultruded grating13×13/40×40;30mm;湿态摆锤 — 13/40 mm mesh, 30 mm, 6 #big tested surface; wet pendulum AS 4586 Appendix A. P5 applies to that tested sample/surface only. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.
AS 4586-2013/Amdt 1-2017 Appendix A · 2026-08-20 · As issued; see original · Sample report; not a product certification
13/40 mm mesh, 30 mm moulded grating50 × 50 × 50 mm; opening 350 mm — Do not substitute for a different opening or span.
Conditional load test · 2020-09-27 · As issued; see original · Sample record — applicability review required
50 × 50 × 50 mm moulded gratingOriginal held for release / applicability review.
L/M/C/J/G and related clips — Installation quantity, torque and loading require project review.
Product reference · · As issued; see original · Product catalogue — not a test report
C25 grating joining clip C30 grating joining clip C38 grating joining clip C50 grating joining clipFRP molded grating — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: FRP molded grating.
ASTM E84-13a · 2014-01-15 · As issued; see original · Sample report; not a product certification
38 × 38 × 38 mm moulded gratingBisphenol-A vinyl ester; 38x38/19x19; 30mm — Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.
ASTM D543-21 / ASTM C581 · 2026-04-29 · As issued; see original · Sample report; not a product certification
H30 moulded mini-mesh gratingBisphenol-A vinyl ester; 19x19/38x38; 30mm — Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.
多项机械性能方法(见报告) · 2026-01-30 · As issued; see original · Sample report; not a product certification
H30 moulded mini-mesh gratingVCF 38x38/19x19; 30mm — Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.
ISO 9227:2022 salt spray · 2026-04-29 · As issued; see original · Sample report; not a product certification
H30 moulded mini-mesh gratingVCF 38x38/19x19; 30mm — Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.
企业方法 FRP-G-DWI-01;参考 ASTM D7136/D5628/F3059 · 2026-03-29 · As issued; see original · Sample report; not a product certification
H30 moulded mini-mesh grating38S38; 38mm; P5; VE/ISO; sample FRP GRATING 1003 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38S38; 38mm; P5; VE/ISO; sample FRP GRATING 1003. P5 is part of the recorded product code here, not a slip rating.
ASTM E84-21 · 2021-07-14 · As issued; see original · Sample report; not a product certification
38 × 38 × 38 mm moulded grating38S38; 38mm; P5; VE/ISO; sample FRP GRATING 7035 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38S38; 38mm; P5; VE/ISO; sample FRP GRATING 7035. P5 is part of the recorded product code here, not a slip rating.
ASTM E84-21 · 2021-07-14 · As issued; see original · Sample report; not a product certification
38 × 38 × 38 mm moulded gratingFRP GRATING 6001; 38s38 38/p5 Ve/iso; smooth. Inventory transcription 7035 conflicts with the original. — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38S38; 38mm; P5; VE/ISO; sample FRP GRATING 6001. P5 is part of the recorded product code here, not a slip rating. Product identifier is retained as printed; catalogue/summary labels differ and must not be silently harmonised. Original sample name is 6001; inventory transcription 7035 conflicts with the original and is not adopted.
ASTM E84-21 · 2021-07-14 · As issued; see original · Sample report; not a product certification
38 × 38 × 38 mm moulded grating38×38×38mm FRP grating; Sample 1 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38×38×38mm FRP grating; Sample 1.
ASTM E84-24 · 2025-03-06 · As issued; see original · Sample report; not a product certification
38 × 38 × 38 mm moulded grating38×38×38mm FRP grating; Sample 3 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38×38×38mm FRP grating; Sample 3.
ASTM E84-24 · 2025-03-06 · As issued; see original · Sample report; not a product certification
38 × 38 × 38 mm moulded grating38×38×38mm FRP grating; Sample 4 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38×38×38mm FRP grating; Sample 4.
ASTM E84-24 · 2025-03-06 · As issued; see original · Sample report; not a product certification
38 × 38 × 38 mm moulded grating38×38×38mm FRP grating; Sample 5 — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38×38×38mm FRP grating; Sample 5.
ASTM E84-24 · 2025-03-06 · As issued; see original · Sample report; not a product certification
38 × 38 × 38 mm moulded grating38×38mm;38mm厚;FRP molded grating — Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report. Original sample description: 38×38mm;38mm厚;FRP molded grating.
ASTM E84-19 · 2019-04-15 · As issued; see original · Sample report; not a product certification
38 × 38 × 38 mm moulded gratingProduct families and catalogue configurations — Historical catalogue reference; not a test report, certification, current stock statement or approved order drawing. Catalogue mass and load-table discrepancies require review.
Product reference · · Filename includes 2023; approved issue/revision date not verified · Catalogue reference — order applicability review required
I6015 pultruded grating T5020 pultruded grating T-3320 pultruded grating HL-4020 pultruded grating HL-5020 pultruded grating HL-6020 pultruded grating C25 FRP c-channel — 25 × 14 × 3 × 3 mm C26 FRP c-channel — 26 × 18 × 3.2 × 3.2 mm C31 FRP c-channel — 31 × 23 × 4 × 4 mm C32 FRP c-channel — 32 × 13 × 3 × 3 mm C33 FRP c-channel — 33 × 29 × 4 × 4 mm C36 FRP c-channel — 36 × 30 × 4 × 4 mm C40 FRP c-channel — 40 × 24 × 3.2 × 3.2 mm C45 FRP c-channel — 45 × 28 × 6.4 × 6.4 mm C50A FRP c-channel — 50 × 14 × 3.2 × 3.2 mm C50B FRP c-channel — 50 × 30 × 5 × 5 mm C52 FRP c-channel — 52 × 50 × 6 × 6 mm C60A FRP c-channel — 60 × 50 × 5 × 5 mm C70 FRP c-channel — 70 × 30 × 4.5 × 4.5 mm C75 FRP c-channel — 75 × 35 × 5 × 5 mm C76A FRP c-channel — 76 × 22 × 6.4 × 6.4 mm C76B FRP c-channel — 76 × 38 × 6.4 × 6.4 mm C80A FRP c-channel — 80 × 40 × 10 × 10 mm C90A FRP c-channel — 90 × 35 × 5 × 5 mm C90B FRP c-channel — 90 × 35 × 8 × 8 mm C90C FRP c-channel — 90 × 50 × 6 × 6 mm C101.6A FRP c-channel — 101.6 × 28.5 × 6.35 × 6.35 mm C102A FRP c-channel — 102 × 27 × 3.2 × 3.2 mm C102B FRP c-channel — 102 × 29 × 4.8 × 4.8 mm C102C FRP c-channel — 102 × 30 × 4 × 4 mm C102E FRP c-channel — 102 × 44 × 4.8 × 4.8 mm C102F FRP c-channel — 102 × 44 × 6.4 × 6.4 mm C102H FRP c-channel — 102 × 35 × 4.8 × 4.8 mm C102G FRP c-channel — 102 × 35 × 6.35 × 6.35 mm C117 FRP c-channel — 117 × 85 × 5 × 5 mm C120A FRP c-channel — 120 × 25 × 5 × 5 mm C120B FRP c-channel — 120 × 30 × 5 × 5 mm C120C FRP c-channel — 120 × 40 × 5 × 5 mm C127A FRP c-channel — 127 × 34.5 × 6.35 × 6.35 mm C127B FRP c-channel — 127 × 70 × 8 × 8 mm C145 FRP c-channel — 145 × 25 × 5 × 5 mm C150A FRP c-channel — 150 × 100 × 6.4 × 6.4 mm C150B FRP c-channel — 150 × 80 × 10 × 10 mm C152A FRP c-channel — 152 × 42 × 4.8 × 4.8 mm C152B FRP c-channel — 152 × 42 × 6.4 × 6.4 mm C152C FRP c-channel — 152 × 42 × 8 × 8 mm C152D FRP c-channel — 152 × 42 × 9.5 × 9.5 mm C152E FRP c-channel — 152 × 51 × 9.5 × 9.5 mm C160 FRP c-channel — 160 × 48 × 8 × 8 mm C203A FRP c-channel — 203 × 56 × 6.4 × 6.4 mm C203B FRP c-channel — 203 × 56 × 9.5 × 9.5 mm C203C FRP c-channel — 203 × 102 × 12.7 × 12.7 mm C203D FRP c-channel — 203 × 102 × 6.5 × 6.5 mm C210A FRP c-channel — 210 × 55 × 5 × 5 mm C210B FRP c-channel — 210 × 80 × 5 × 5 mm C210C FRP c-channel — 210 × 85 × 5 × 5 mm C240A FRP c-channel — 240 × 72 × 8 × 8 mm C240B FRP c-channel — 240 × 115 × 5 × 5 mm C249A FRP c-channel — 249 × 151 × 4.76 × 4.76 mm C249B FRP c-channel — 249 × 201.6 × 4.76 × 4.76 mm C254 FRP c-channel — 254 × 70 × 12.7 × 12.7 mm C263A FRP c-channel — 263 × 157 × 4.76 × 4.76 mm C263B FRP c-channel — 263 × 208 × 4.76 × 4.76 mm C292 FRP c-channel — 292 × 70 × 12.7 × 12.7 mm C300 FRP c-channel — 300 × 55 × 5 × 5 mm C305A FRP c-channel — 305 × 76.2 × 12.7 × 12.7 mm C310A FRP c-channel — 310 × 115 × 5 × 5 mm C356 FRP c-channel — 356 × 89 × 19 × 19 mm C381 FRP c-channel — 381 × 90 × 10 × 10 mm C436 FRP c-channel — 436 × 90 × 10 × 10 mm C491 FRP c-channel — 491 × 90 × 12 × 12 mm C610 FRP c-channel — 610 × 76 × 6.4 × 6.4 mm C902 FRP c-channel — 902 × 100 × 10 × 10 mm C970 FRP c-channel — 970 × 40 × 10 × 10 mm ST25A FRP square tube — 25 × 25 × 3.2 × 3.2 mm ST25B FRP square tube — 25 × 25 × 6.4 × 6.4 mm ST32A FRP square tube — 32 × 32 × 3.2 × 3.2 mm ST32B FRP square tube — 32 × 32 × 6.4 × 6.4 mm ST38A FRP square tube — 38 × 38 × 3.2 × 3.2 mm ST38B FRP square tube — 38 × 38 × 5 × 5 mm ST38C FRP square tube — 38 × 38 × 6.4 × 6.4 mm ST44A FRP square tube — 44 × 44 × 3.2 × 3.2 mm ST44B FRP square tube — 44 × 44 × 6.4 × 6.4 mm ST50A FRP square tube — 50 × 50 × 3.2 × 3.2 mm ST50B FRP square tube — 50 × 50 × 3.5 × 3.5 mm ST50C FRP square tube — 50 × 50 × 4 × 4 mm ST50D FRP square tube — 50 × 50 × 5 × 5 mm ST50E FRP square tube — 50 × 50 × 6.4 × 6.4 mm ST54A FRP square tube — 54 × 54 × 3.2 × 3.2 mm ST54B FRP square tube — 54 × 54 × 4.8 × 4.8 mm ST60A FRP square tube — 60 × 60 × 5 × 5 mm ST64A FRP square tube — 64 × 64 × 3.2 × 3.2 mm ST64B FRP square tube — 64 × 64 × 4.4 × 4.4 mm ST64C FRP square tube — 64 × 64 × 6.4 × 6.4 mm ST76A FRP square tube — 76 × 76 × 3.2 × 3.2 mm ST76B FRP square tube — 76 × 76 × 5 × 5 mm ST76C FRP square tube — 76 × 76 × 6.4 × 6.4 mm ST76D FRP square tube — 76 × 76 × 9.5 × 9.5 mm ST89A FRP square tube — 89 × 89 × 6.4 × 6.4 mm ST90A FRP square tube — 90 × 90 × 5 × 5 mm ST90B FRP square tube — 90 × 90 × 6.4 × 6.4 mm ST100A FRP square tube — 100 × 100 × 10 × 10 mm ST101A FRP square tube — 101 × 101 × 3.2 × 3.2 mm ST101B FRP square tube — 101 × 101 × 5 × 5 mm ST101C FRP square tube — 101 × 101 × 6.4 × 6.4 mm ST101D FRP square tube — 101 × 101 × 8 × 8 mm ST125A FRP square tube — 125 × 125 × 6.4 × 6.4 mm ST125B FRP square tube — 125 × 125 × 8 × 8 mm ST152A FRP square tube — 152 × 152 × 6.4 × 6.4 mm ST152B FRP square tube — 152 × 152 × 9.5 × 9.5 mm ST152C FRP square tube — 152 × 152 × 12.7 × 12.7 mm EL25A FRP angle — 25 × 25 × 3.2 × 3.2 mm EL25B FRP angle — 25 × 25 × 6.4 × 6.4 mm EL30B FRP angle — 30 × 25 × 5 × 5 mm EL32 FRP angle — 32 × 32 × 4 × 4 mm EL38A FRP angle — 38 × 38 × 5 × 5 mm EL38B FRP angle — 38 × 38 × 6.4 × 6.4 mm EL45 FRP angle — 45 × 45 × 4.8 × 4.8 mm EL50A FRP angle — 50 × 50 × 3.2 × 3.2 mm EL50B FRP angle — 50 × 50 × 6.4 × 6.4 mm EL50.8 FRP angle — 50.8 × 50.8 × 4 × 4 mm EL60 FRP angle — 60 × 60 × 9 × 9 mm EL76A FRP angle — 76 × 76 × 4.8 × 4.8 mm EL76B FRP angle — 76 × 76 × 6.4 × 6.4 mm EL76C FRP angle — 76 × 76 × 9.5 × 9.5 mm EL76D FRP angle — 76 × 76 × 12.7 × 12.7 mm EL101A FRP angle — 101 × 101 × 6.4 × 6.4 mm EL101B FRP angle — 101 × 101 × 8 × 8 mm EL101C FRP angle — 101 × 101 × 9.5 × 9.5 mm EL101D FRP angle — 101 × 101 × 12.7 × 12.7 mm EL152A FRP angle — 152 × 152 × 6.4 × 6.4 mm EL152B FRP angle — 152 × 152 × 9.5 × 9.5 mm EL152C FRP angle — 152 × 152 × 12.7 × 12.7 mm L40 FRP angle — 40 × 22 × 4 × 4 mm L50 FRP angle — 50 × 40 × 6.35 × 6.35 mm L76 FRP angle — 76 × 15 × 6 × 6 mm L100 FRP angle — 100 × 50 × 6.4 × 6.4 mm L145 FRP angle — 145 × 76 × 10 × 10 mm L170 FRP angle — 170 × 76 × 9.5 × 9.5 mm L180 FRP angle — 180 × 30 × 8 × 8 mm L254 FRP angle — 254 × 40 × 6.4 × 6.4 mm IB32 FRP i-beam — 15 × 32 × 4.4 × 4 mm IB38A FRP i-beam — 30 × 38 × 4 × 4 mm IB50A FRP i-beam — 50 × 102 × 6.4 × 6.4 mm IB50B FRP i-beam — 50 × 102 × 8 × 8 mm IB70 FRP i-beam — 70 × 140 × 6.35 × 6.35 mm IB76A FRP i-beam — 76 × 152 × 6.4 × 6.4 mm IB76B FRP i-beam — 76 × 152 × 9.5 × 9.5 mm IB100 FRP i-beam — 100 × 75 × 6 × 6 mm IB102A FRP i-beam — 102 × 203 × 9.5 × 9.5 mm IB102B FRP i-beam — 102 × 203 × 12.7 × 12.7 mm IB120 FRP i-beam — 120 × 240 × 12 × 12 mm IB127A FRP i-beam — 127 × 254 × 9.5 × 9.5 mm IB127B FRP i-beam — 127 × 254 × 12.7 × 12.7 mm IB127C FRP i-beam — 127 × 152 × 9.5 × 9.5 mm IB127D FRP i-beam — 127 × 152 × 12.7 × 12.7 mm IB152A FRP i-beam — 152 × 305 × 9.5 × 9.5 mm IB152B FRP i-beam — 152 × 305 × 12.7 × 12.7 mm HB76 FRP h-beam — 76 × 76 × 6.4 × 6.4 mm HB102A FRP h-beam — 102 × 102 × 6.4 × 6.4 mm HB102B FRP h-beam — 102 × 102 × 8 × 8 mm HB152A FRP h-beam — 152 × 152 × 6.4 × 6.4 mm HB152B FRP h-beam — 152 × 152 × 9.5 × 9.5 mm HB203A FRP h-beam — 203 × 203 × 9.5 × 9.5 mm HB203B FRP h-beam — 203 × 203 × 12.7 × 12.7 mm HB254A FRP h-beam — 254 × 254 × 9.5 × 9.5 mm HB254B FRP h-beam — 254 × 254 × 12.7 × 12.7 mm HB305 FRP h-beam — 305 × 305 × 12.7 × 12.7 mm CT32A FRP plum-flower tube — 19 × 32 × 6.4 mm CT32B FRP plum-flower tube — 25 × 32 × 3.5 mm CT32C FRP plum-flower tube — 22 × 32 × 5 mm CT34A FRP plum-flower tube — 19 × 34 × 7.5 mm CT37.5 FRP plum-flower tube — 37.5 × 21.5 × 8 mm CT42 FRP plum-flower tube — 29 × 42 × 6.4 mm CT45A FRP plum-flower tube — 28 × 45 × 8.5 mm CT45B FRP plum-flower tube — 32 × 45 × 6.4 mm CT51 FRP plum-flower tube — 51 × 36 × 7 mm CT90A FRP plum-flower tube — 71 × 90 × 9.5 mm M2 FRP skirtboard — 100 × 13 × 3.2 mm M3 FRP skirtboard — 100 × 16 × 5 mm M4 FRP skirtboard — 148 × 12 × 4 mm M5 FRP skirtboard — 148 × 12 × 3 mm W1 FRP skirtboard — 100 × 19 × 5 mm W2 FRP skirtboard — 100 × 15 × 3.2 mm W3 FRP skirtboard — 150 × 16 × 3.2 mm W4 FRP skirtboard — 200 × 14 × 3 mm RT25 FRP circular tube — 25 × 3.2 mm RT32A FRP circular tube — 32 × 3.2 mm RT32B FRP circular tube — 32 × 5 mm RT35A FRP circular tube — 35 × 2.5 mm RT38A FRP circular tube — 38 × 3.2 mm RT38B FRP circular tube — 38 × 4 mm RT38C FRP circular tube — 38 × 5 mm RT38D FRP circular tube — 38 × 6.4 mm RT42A FRP circular tube — 42 × 3.2 mm RT42B FRP circular tube — 42 × 5 mm RT48 FRP circular tube — 48 × 6.4 mm RT50A FRP circular tube — 50 × 3.2 mm RT50B FRP circular tube — 50 × 4 mm RT50C FRP circular tube — 50 × 5 mm RT50D FRP circular tube — 50 × 6.4 mm RT60 FRP circular tube — 60 × 4.5 mm RT50.8 FRP circular tube — 50.8 × 6.4 mm RT64A FRP circular tube — 64 × 3.5 mm RT64B FRP circular tube — 64 × 7 mm RT76 FRP circular tube — 76 × 6.4 mm RT89A FRP circular tube — 89 × 3.2 mm RT89B FRP circular tube — 89 × 5 mm RT89C FRP circular tube — 89 × 6.4 mm RT99 FRP circular tube — 99 × 5 mm RT100 FRP circular tube — 100 × 4.5 mm RT101 FRP circular tube — 101 × 6.4 mm RT114A FRP circular tube — 114 × 3.2 mm RT114B FRP circular tube — 114 × 5 mm RT114C FRP circular tube — 114 × 6.4 mm RT114D FRP circular tube — 114 × 9.5 mm RT140 FRP circular tube — 140 × 3 mm RT150A FRP circular tube — 150 × 3.2 mm RT150B FRP circular tube — 150 × 5 mm RT150C FRP circular tube — 150 × 6.4 mm RT150D FRP circular tube — 150 × 9.5 mm FP32A FRP flat plank — 3.2 × 1000 mm FP32B FRP flat plank — 3.2 × 1220 mm FP40A FRP flat plank — 4 × 800 mm FP40B FRP flat plank — 4 × 1200 mm FP48A FRP flat plank — 4.8 × 1000 mm FP50A FRP flat plank — 5 × 440 mm FP50B FRP flat plank — 5 × 1220 mm FP64A FRP flat plank — 6.4 × 1220 mm FP95A FRP flat plank — 9.5 × 1220 mm FP127A FRP flat plank — 12.7 × 1220 mm FP160A FRP flat plank — 16 × 1220 mm FP190A FRP flat plank — 19 × 1220 mm FP254A FRP flat plank — 25.4 × 1220 mm FS19A FRP flat lath — 19 × 6.4 mm FS19B FRP flat lath — 19 × 22 mm FS24A FRP flat lath — 24.6 × 3.4 mm FS25A FRP flat lath — 25.4 × 8 mm FS30A FRP flat lath — 30 × 3 mm FS30B FRP flat lath — 30 × 6.4 mm FS35A FRP flat lath — 35 × 8 mm FS38A FRP flat lath — 38 × 5 mm FS38B FRP flat lath — 38 × 8 mm FS38C FRP flat lath — 38 × 15 mm FS40A FRP flat lath — 40 × 8 mm FS40B FRP flat lath — 40 × 10 mm FS46A FRP flat lath — 46 × 6.4 mm FS50A FRP flat lath — 50 × 2 mm FS50B FRP flat lath — 50 × 4 mm FS50C FRP flat lath — 50 × 6 mm FS50D FRP flat lath — 50 × 8 mm FS50E FRP flat lath — 50 × 15 mm FS50F FRP flat lath — 50 × 25 mm FS60A FRP flat lath — 60 × 2 mm FS60B FRP flat lath — 60 × 4 mm FS64A FRP flat lath — 64 × 4.8 mm FS64B FRP flat lath — 64 × 15 mm FS70A FRP flat lath — 70 × 4 mm FS76A FRP flat lath — 76 × 9.5 mm FS76B FRP flat lath — 76 × 14 mm FS100A FRP flat lath — 100 × 10 mm FS100B FRP flat lath — 100 × 25 mm FS102B FRP flat lath — 102 × 5 mm FS102C FRP flat lath — 102 × 6.4 mm FS120A FRP flat lath — 120 × 10 mm FS127A FRP flat lath — 127 × 6.4 mm FS152A FRP flat lath — 152 × 10 mm FS152B FRP flat lath — 152 × 20 mm FS190A FRP flat lath — 190 × 15 mm FS250A FRP flat lath — 250 × 12 mm FT50A FRP rectangular tube — 50 × 25 × 3 × 3 mm FT50B FRP rectangular tube — 50 × 25 × 6.4 × 6.4 mm FT52 FRP rectangular tube — 52 × 32 × 5 × 5 mm SSR25 FRP solid square rod — 25 × 25 mm SSR32 FRP solid square rod — 32 × 32 mm SSR38 FRP solid square rod — 38 × 38 mm SRR95 FRP solid round rod — 9.5 mm SRR127 FRP solid round rod — 12.7 mm SRR254 FRP solid round rod — 25.4 mm SRR318 FRP solid round rod — 31.8 mm SRR380 FRP solid round rod — 38 mm FS280A FRP flat strip — 280 × 10 mm FS300A FRP flat strip — 300 × 24 mm FS355A FRP flat strip — 35.5 × 5 mm FS555A FRP flat strip — 555 × 5 mm FS751A FRP flat strip — 751 × 5 mm FS762A FRP flat strip — 762 × 9.5 mm FS70 FRP chamfered flat strip — 70 × 4 mm FS90A FRP chamfered flat strip — 90 × 3.2 mm FS120 FRP chamfered flat strip — 120 × 3 mm6000 ± 3 × 1000 ± 3 mm panel; nominal depth 38 ± 1 mm — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.
Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor
I6015 pultruded gratingOriginal held for release / applicability review.
6100 ± 3 × 1000 ± 3 mm panel; nominal depth 38 ± 1 mm — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.
Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor
I6015 pultruded gratingOriginal held for release / applicability review.
830 × 591 mm fabricated cut panel; nominal depth 38 mm — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Three distinct files share A0. No approved revision sequence, test-batch drawing/BOM link, current SKU equivalence or external drawing release is confirmed. Three different geometries carry the same A0 revision. No approved replacement sequence or sample-to-drawing traceability to the 2014 E84 report has been established.
Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor
I6015 pultruded gratingOriginal held for release / applicability review.
Covering/fabrication drawing; not the bare E84 specimen — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Covered/fabricated assembly is not established as the bare T5020 E84 specimen. Missing controlled section/BOM, resin/surface traceability, current model mapping and external release. Reconcile manual depth 51 mm with the report nominal 50 mm; this covering drawing is not evidence that the complete assembly was fire-tested.
Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor
T5020 pultruded gratingOriginal held for release / applicability review.
3007 ± 3 × 1007 ± 3 mm panel; 50 mm pitch; 50 ± 1 mm depth — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Two different panel layouts share A0. Neither is established as the 1230×450×50 mm CO350 test component, its support assembly or a current released order drawing. Neither panel drawing identifies the 1230 × 450 × 50 mm / CO350 tested component; do not infer load or A15 applicability.
Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor
50 × 50 × 50 mm moulded gratingOriginal held for release / applicability review.
1007 ± 3 × 1007 ± 3 mm panel; 50 mm pitch; 50 ± 1 mm depth — Confirmed: the drawing title, printed A0 revision and the dimensions stated above. Not confirmed: current ordered configuration or correspondence to the tested specimen. Two different panel layouts share A0. Neither is established as the 1230×450×50 mm CO350 test component, its support assembly or a current released order drawing. Neither panel drawing identifies the 1230 × 450 × 50 mm / CO350 tested component; do not infer load or A15 applicability.
Drawing reference — not a test report · · A0 (printed; no approved issue date recorded) · Parallel candidate — not an approved successor
50 × 50 × 50 mm moulded gratingOriginal held for release / applicability review.

User-supplied original. Workshop/site evidence, not a named customer installation.

User-supplied original. Workshop/site evidence, not a named customer installation.

User-supplied original. Workshop/site evidence, not a named customer installation.

User-supplied original. Workshop/site evidence, not a named customer installation.

User-supplied original. Workshop/site evidence, not a named customer installation.

MACHS supplied archive I0537. Flat-bar family photograph only; pictured holes, sizes, colours and materials are not an approved order specification. Confirm the finished drawing and revision.
FRP rods & flat bars
Supplied archive I0269. Mixed configurations are shown. The photograph does not establish a particular C25/C30/C38/C50 geometry, material grade or test specimen.
C25 grating joining clip C30 grating joining clip C38 grating joining clip C50 grating joining clip