MACHS

Company capabilities

From a drawing to an agreed component supply

Define the drawing revision, critical dimensions, machining and delivery boundary before comparing quotations.

MACHS pultruded FRP grating panels in the workshop; representative family photograph, not a tested specimen identification

MACHS supplied workshop photograph of pultruded grating. Representative family photograph; geometry and report applicability require separate verification.

A drawing-based enquiry should describe both the finished component and the work included. Separate raw profile lengths, cut pieces and assemblies so the quotation can identify the same deliverables.

Related buyer FAQ · Review application conditions · More buying questions

Send a controlled drawing package

Provide the current drawing number and revision, units, section dimensions, wall thickness where applicable, lengths, hole positions and tolerances. Identify mating parts and critical interfaces. For solid rods and flat bars, use diameter or width/thickness rather than wall thickness.

Distinguish an existing section from new tooling

Ask whether the section and tooling match the required drawing. A similar catalogue shape or a workshop photograph does not establish tooling availability or dimensions. Include order quantity and annual demand when a new section is under review.

Agree the fabrication and inspection scope

Identify cutting, drilling, edge/end treatment, component numbering and the inspection features to check. Confirm feasible operations and tolerances against the drawing before work starts; listing an operation here does not confirm every geometry can be machined.

Define delivery and changes

List loose parts, fixings, any agreed preassembly, packing and assembly instructions required. State who designs the structure and who installs it. Keep the approved revision with the order; agree the effect of a later change on work, cost and timing before releasing it.

Review evidence · Discuss your requirement

Frequently asked questions

Does an initial drawing release fabrication?

No. Identify the drawing number, revision, units and approval status. Agree critical dimensions, tolerances and outstanding interfaces before release.

How should full sections and finished components be distinguished?

List the section and length separately from the cuts, holes, machining, assembly and packing requested. Make the delivered scope and exclusions explicit.

Who approves the technical and installation boundaries?

Identify the responsible parties and the applicable configuration evidence. A component quotation does not by itself approve the structure or installation; include unresolved responsibilities in the enquiry.

Related technical resources

Related products

MACHS supplied pultruded profile-family photograph; exact section and dimensions require drawing confirmationPultruded FRP tubesPultruded FRP tubes for frame, rail and OEM component selection. Compare section shapes and dimensions, then send your drawing, cut lengths and quantities for supply review.Supplied MACHS archive photograph of solid round rods. Flat bars are a separate section option; confirm the approved drawing, dimensions, material and finish. Colours do not identify a resin or performance grade.FRP rods & flat barsFRP solid rods and flat bars for fabricated components. Find a catalogue section, check its dimensions, then send your cut lengths, tolerances and quantities for quotation review.Supplied MACHS archive photograph showing mixed pultruded section families, including I-sections and channels. Confirm the particular section drawing and dimensions; the assortment is not a claim that every size is stocked.FRP beams & structural profilesFRP beams, channels and angles for fabricated structures. Compare catalogue sections, then send your drawing, connections and design conditions to define the supply and evidence you need.Platform and access components preassembled in the MACHS workshopFRP platforms & access componentsFRP grating, rails, stairs and connections for platform and access projects. Send your layout and component list to clarify the supply, technical evidence and design responsibilities before quotation.Supplied MACHS archive photograph of moulded connector components. This is a product-family illustration, not a released part drawing or evidence of structural, fire or electrical performance.SMC/BMC compression-moulded productsSMC/BMC compression-moulded components for drawing-based OEM enquiries. Send your part drawing, material requirements and quantities to review tooling, samples and the proposed supply.C-type panel-to-panel joining clip schematic from the MACHS legacy websiteC25 grating joining clipC25 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.C-type panel-to-panel joining clip schematic from the MACHS legacy websiteC30 grating joining clipC30 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.C-type panel-to-panel joining clip schematic from the MACHS legacy websiteC38 grating joining clipC38 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.C-type panel-to-panel joining clip schematic from the MACHS legacy websiteC50 grating joining clipC50 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.

Your enquiry brief

Part/application and destination:

Drawing number, revision and units:

Section dimensions, wall thickness if applicable, length:

Order quantity and annual demand:

Material, exposure and required evidence:

Cuts, holes, tolerances and critical interfaces:

Labels, inspection, assembly and packing:

Design/installation responsibilities and required date:

Ready to discuss this requirement?

Carry this checklist into the enquiry form, fill in what you know and mark unresolved items for review.

Use this brief in your enquiry