MACHS

Moulded grating

60.2 × 76.2 S38 grating panel

S38 FRP grating with 60.2 × 76.2 mm pitch for industrial access selection. Check the recorded configuration and sample evidence, then send your panel sizes and support conditions.

MACHS supplied moulded grating representative product-family photograph
Representative moulded grating photograph from the MACHS supplied archive. Confirm the exact geometry, dimensions, resin and surface against the approved order drawing; the photograph is not evidence of the tested configuration.
← Moulded grating

Specification notes

Approximate opening45 × 58.2 mm
Load bar15.2 × 38.1 mm
ResinVinyl ester
SurfaceGrit finish
Pitch60.2 × 76.2 mm
Depth38.1 mm

Parameter source: P002 / V9 2026-11-05 / V8 R3. Only the listed configuration is described. Missing dimensions, mass and working loads are not estimated.

Match the dimensions on the drawing

The recorded pitch is 60.2 × 76.2 mm; the approximate opening is 45 × 58.2 mm and the load bar is 15.2 × 38.1 mm. These describe different features. Check which feature the buyer specification controls instead of treating all mesh measurements as interchangeable.

Resolve exposure and loading first

Vinyl ester and a grit finish identify this configuration; they are not a universal chemical, slip or load guarantee. Provide the chemicals, concentration, temperature, supports, clear span and intended traffic. Request configuration-specific evidence when a project requires a named rating.

Define mesh, opening and depth separately

Use the mesh designation and panel depth as separate dimensions. Mesh pitch and the clear gap between ribs are different measurements; a smaller secondary mesh is another configuration detail. Specify the walking surface and resin independently. Ask for the applicable section drawing before matching a photograph or an abbreviated size to an order.

Decide what the application needs

For walkways, trench covers and platform areas, first identify who or what will cross the panel, support positions, clear span, load contact area and the required deflection limit. Consider drainage, debris, cleaning access and footwear when choosing an opening. A small opening or gritted surface does not by itself demonstrate compliance with a pedestrian-access or slip standard.

Agree the finished panel and fixing scope

List full-panel sizes or each cut part, finished dimensions and units, edge and cut-out locations, identification marks and fixing requirements. Distinguish panel-to-panel joining from attachment to the supporting structure. Agree which drawings, inspection criteria and records accompany the order; do not infer a tested assembly from the panel name alone.

Swipe or scroll the table horizontally to read all columns on a small screen.

Recorded specification — 60.2 × 76.2 S38 grating panel
Specification itemRecorded value
Approximate opening45 × 58.2 mm
Load bar15.2 × 38.1 mm
ResinVinyl ester
SurfaceGrit finish
Pitch60.2 × 76.2 mm
Depth38.1 mm
Does a mesh size identify the whole specification?

No. Confirm mesh pitch, clear opening, depth, rib geometry, resin, surface, panel outline and supports. The same nominal mesh and depth can have different rib sections or formulations.

Technical pack for this configuration

Use the model, drawing revision and tested conditions together. Missing files are not evidence of a verified specification.

No matched test report is recorded for this entry. Request a configuration-specific evidence review.

Installation planning checklistRequest missing or applicable files

Compare this configuration

Installation planning · Your buying path · Technical resources

Applications

Specify chemical-process accessDefine the chemical exposure and the structural requirement separately, then match the proposed panel to its material evidence.Coordinate grating, framing, rails and connections.Plan industrial platforms and equipment accessCoordinate the component list, support and connection details, maintenance openings and responsibility for installation.

Selection guides

MACHS pultruded FRP grating panels in the workshop; representative family photograph, not a tested specimen identificationChoose resin from the actual exposureSend chemical concentration, temperature and contact conditions before asking which resin is suitable.MACHS pultruded FRP grating panels in the workshop; representative family photograph, not a tested specimen identificationCompare grating quotations on the same basisAlign the configuration, finished quantities and delivery scope before comparing the total price.MACHS pultruded FRP grating panels in the workshop; representative family photograph, not a tested specimen identificationRead a load table with its support conditionsMatch the panel, support arrangement, span and loading before using a load value.

Related products in this family

Review the section, dimensions and evidence for each entry. A related product is not an interchangeable or approved substitute.

MACHS supplied moulded grating representative product-family photograph50 × 50 × 50 mm moulded grating50 mm-deep moulded FRP grating with 50 × 50 mm mesh for platform selection. Review the sample load conditions, then send your span, loads and panel sizes for configuration review.Green micro-mesh grating photograph from the supplied MACHS archive13/40 mm mesh, 30 mm moulded grating30 mm moulded FRP grating with 13/40 mm mesh for walkway selection. Check the recorded surface and sample-specific slip report, then send your application and panel requirements.MACHS supplied moulded grating representative product-family photograph38 × 38 × 38 mm moulded grating38 mm-deep moulded FRP grating with 38 × 38 mm mesh for walkway and platform selection. Compare resin and surface options, then send panel sizes and support conditions for quotation.

Request specifications

Selected product: 60.2 × 76.2 S38 grating panel. This configuration is included with your enquiry.

State known conditions and write "not sure — please advise" for anything unresolved. No need to guess the resin or load.

Privacy and enquiry data · What to include

Attach your drawing or specification and include its drawing number and revision in the requirements. You can also contact info@machsfrp.com.