30 mm moulded mini-mesh FRP grating for walkway and platform selection. Check the recorded mesh and surface options, then send panel sizes, service conditions and quantities for review.
Representative moulded grating photograph from the MACHS supplied archive. Confirm the exact geometry, dimensions, resin and surface against the approved order drawing; the photograph is not evidence of the tested configuration.← Moulded grating
Parameter source: P003 / V9 2026-11-05 / V8 R3. Only the listed configuration is described. Missing dimensions, mass and working loads are not estimated.
Check the double mesh before comparing
H30 here means a total depth of 30 mm and 38 × 38 / 19 × 19 mm mesh. It is a different configuration from single-mesh 38 × 38 × 30 mm grating and from the 13/40 mm micro-mesh entry. Confirm the required opening and access conditions on the project drawing.
Specify the surface and exposure
Smooth and gritted versions are recorded options, subject to configuration confirmation. Tell us whether the area is wet, exposed to chemicals or cleaned regularly. Include chemical concentration and temperature where relevant; do not choose a resin from the application name alone.
Understand the reports attached below
The four linked material reports concern the identified Bisphenol-A vinyl-ester / VCF sample configuration. They do not certify every polyester, isophthalic or vinyl-ester option. Send the required method and the report number you want reviewed with the quotation.
Define mesh, opening and depth separately
Use the mesh designation and panel depth as separate dimensions. Mesh pitch and the clear gap between ribs are different measurements; a smaller secondary mesh is another configuration detail. Specify the walking surface and resin independently. Ask for the applicable section drawing before matching a photograph or an abbreviated size to an order.
Decide what the application needs
For walkways, trench covers and platform areas, first identify who or what will cross the panel, support positions, clear span, load contact area and the required deflection limit. Consider drainage, debris, cleaning access and footwear when choosing an opening. A small opening or gritted surface does not by itself demonstrate compliance with a pedestrian-access or slip standard.
Agree the finished panel and fixing scope
List full-panel sizes or each cut part, finished dimensions and units, edge and cut-out locations, identification marks and fixing requirements. Distinguish panel-to-panel joining from attachment to the supporting structure. Agree which drawings, inspection criteria and records accompany the order; do not infer a tested assembly from the panel name alone.
Mini mesh and micro mesh are not interchangeable labels
This page’s mesh dimensions are the recorded configuration. Do not substitute another double-mesh arrangement merely because both products are 30 mm deep or described as mini mesh. Use the actual drawing and report sample identity, including surface preparation, when requesting slip evidence.
Swipe or scroll the table horizontally to read all columns on a small screen.
Recorded specification — H30 moulded mini-mesh grating
Does a mesh size identify the whole specification?
No. Confirm mesh pitch, clear opening, depth, rib geometry, resin, surface, panel outline and supports. The same nominal mesh and depth can have different rib sections or formulations.
Technical pack for this configuration
Use the model, drawing revision and tested conditions together. Missing files are not evidence of a verified specification.
Specification: recorded parameters on this page; dimensions not listed require drawing review.
Model drawing and revision: no released model drawing is linked in this local catalogue. Request the applicable drawing.
Load / span: no general allowable-load table is released here. Confirm support, span, load direction and deflection criteria.
CBT30406071087
Bisphenol-A vinyl ester; 38x38/19x19; 30mm
Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.
Applicant / publisher: Nantong Machs Composite Material Co., Ltd. (as recorded in original) · Source: MACHS original sample report
Version: As issued; see original · Sample report; not a product certification
Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.
Applicant / publisher: Nantong Machs Composite Material Co., Ltd. (as recorded in original) · Source: MACHS original sample report
Version: As issued; see original · Sample report; not a product certification
Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.
Applicant / publisher: Nantong Machs Composite Material Co., Ltd. (as recorded in original) · Source: MACHS original sample report
Version: As issued; see original · Sample report; not a product certification
Reference / method: ISO 9227:2022 salt spray · Issued: 2026-04-29
No blanket current certification or working-load claim. A report without an expiry date is still sample-specific.
Bisphenol-A vinyl-ester 38/19 mm mesh, 30 mm sample only; not all H30 resin/surface options. Only the identified tested specimen/configuration. Matching nominal dimensions does not establish the same resin, formulation, surface, batch or working load. Confirm the proposed supply against the complete original report.
Applicant / publisher: Nantong Machs Composite Material Co., Ltd. (as recorded in original) · Source: MACHS original sample report
Version: As issued; see original · Sample report; not a product certification