Ask for the underlying report and identify the test method, the surface tested and the conditions used. Then compare that scope with the proposed product and the foreseeable contamination at the installation. A result without those details is an incomplete basis for a purchasing decision.
For a UK reviewer, this is an evidence-applicability task as well as a product enquiry. HSE's flooring guidance places the work activity and likely contamination in the assessment context. A supplier's surface description should therefore not be treated as an unrestricted safety assurance. HSE flooring guidance.
What should the original report identify before its result is compared?
Record the named test method and its stated version, the issuer, the specimen identification and the reported test conditions. Read any limitations. Do not rely only on a cropped result table or a certificate image that omits the specimen description.
Keep different methods distinct
If two offers present different test methods or classifications, ask a competent reviewer how each relates to the requirement. Do not create a conversion between their numbers or assume that a larger number from one method outranks a result from another.
HSE publishes a technical information sheet on assessing flooring slip resistance. Use the actual method and scope in the submitted report rather than infer them from the words “tested surface”. HSE testing information.
Does the specimen represent the surface being supplied?
Match the report to the offered configuration, including the relevant surface finish and any specimen condition stated in the document. A report for another finish does not become evidence for the quotation simply because both products are GRP.
Ask about any unaddressed difference
Where the supplier relies on evidence from a related configuration, request the basis for its applicability. Do not silently remove the difference from the comparison. Confirm what will be supplied so that the order does not revert to a broad description after a specific surface was reviewed.
A photograph can help identify appearance, but it cannot establish a test result. Likewise, colour and the marketing term “gritted” should not be used as substitutes for the relevant evidence.
Is a wet test the same as the contamination expected at the site?
Read what “wet” means in the report. Identify the actual test condition rather than treat the word as coverage of every liquid or process residue. Describe the expected site contamination and have its relevance assessed against the available evidence.
HSE explains slip risk using several factors, including flooring, contamination and pedestrian use. Our procurement implication is to send a use description alongside the report request rather than ask the supplier for an isolated performance label. HSE assessment-tool explanation.
How should the review outcome be recorded?
Keep the evidence scope and the site question in separate fields. This makes it possible to see whether a document has been received without implying that its applicability has already been accepted.
| Review field | What to record |
|---|---|
| Offered surface | Identified configuration and finish |
| Submitted evidence | Report reference and issuing body |
| Test scope | Method, specimen and stated conditions |
| Intended use | Relevant activity and foreseeable contamination |
| Difference or gap | What the document does not resolve |
| Review outcome | Accepted scope, conditions or further information required |
This is an editorial purchasing record, not a risk-assessment method or a pass/fail standard. It does not set a universal test threshold or certify an installed route.
What should MACHS be asked to substantiate?
Use the MACHS fire and slip evidence guide to frame a request for the document applicable to the actual offered surface. Identify any wet-condition claim you need reviewed; do not assume that a general product page establishes it.
MACHS's product knowledge routes slip-performance conclusions through technical review and product-specific evidence. Our position for this enquiry is to keep the claim no broader than the supporting document and accepted application scope.
Gavin Yang's public specification viewpoint includes surface and installation among coordinated decisions. For wet-area procurement, our editorial application is to review the surface evidence together with its intended use. His comment does not supply a test value or approve a site. Public viewpoint source.
Next step: send MACHS the intended use and evidence question, including the offered surface and expected contamination. Ask which original document addresses the claim and what remains for the responsible site reviewer to assess.
Frequently asked questions
Does “anti-slip” mean the product is suitable for any wet area?
No unrestricted conclusion follows from that wording. Request the supporting method, conditions and configuration, then review their relevance to the intended use.
Can I compare two ratings without reading the methods?
Do not assume the scales or conditions are equivalent. Preserve the method information and request an appropriate interpretation.
Does a new-surface report establish the future condition of an installed walkway?
It describes the tested scope. Do not extend it into an unsupported service-life or maintenance-free assurance; the site's assessment and ongoing management remain separate.
Related buyer FAQ · Review application conditions · More buying questions
Review evidence · Discuss your requirement
Frequently asked questions
Does “anti-slip” mean the product is suitable for any wet area?
No unrestricted conclusion follows from that wording. Request the supporting method, conditions and configuration, then review their relevance to the intended use.
Can I compare two ratings without reading the methods?
Do not assume the scales or conditions are equivalent. Preserve the method information and request an appropriate interpretation.
Does a new-surface report establish the future condition of an installed walkway?
It describes the tested scope. Do not extend it into an unsupported service-life or maintenance-free assurance; the site's assessment and ongoing management remain separate.
