Grating joining clips — supplied packing photograph

Supplied archive I0269. Mixed configurations are shown. The photograph does not establish a particular C25/C30/C38/C50 geometry, material grade or test specimen.
View in technical resources
Clips & accessories
C50 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.

| Model | C50 |
|---|---|
| Function | Join adjacent grating panels |
| Material options | Galvanized, SS304, SS316 or SS316L — confirm |
| Matching | Confirm mesh, depth and joint purpose; not a substitute for hold-down clips |
Parameter source: P07 → P049 / V9 2026-11-05 / V8 R3. Only the listed configuration is described. Missing dimensions, mass and working loads are not estimated.
C-type clips join adjacent grating panels. If your task is fixing a panel to its supporting structure, ask for the appropriate hold-down arrangement instead of using a joining clip as a substitute.
Identify the grating model, mesh, depth, edge/joint arrangement, access for installation and service exposure. Provide the material requirement, quantity and a joint sketch. Do not select a clip solely because its code contains a similar depth number.
Check the clip dimensions and which bolts, nuts or other parts are included against the applicable drawing or catalogue. Material options do not mean every option is held in stock or carries the same documentation.
Use a C-type joining clip when the requirement is to connect adjacent grating panels, subject to the actual joint detail. Attachment of a panel to a supporting member is a separate fixing task. Confirm both requirements in the installation drawing rather than expecting one clip type to perform both jobs.
Send the two panel edge details, mesh pitch and clear gap, panel depth, joint gap, underside access and proposed fastener arrangement. The C25/C30/C38/C50 designation alone is not a verified set of dimensions or proof that a clip fits a particular panel.
State the required clip and fastener material and the exposure conditions. Agree the full assembly, quantities, fixing positions and installation instructions for the project. The catalogue illustrates clip families; it does not establish a universal torque, capacity or fixing interval.
Include the model code, quantity, photographs or a sketch of the joint, panel geometry, required metal grade and any installation standard. Mark uncertain dimensions for review. Ask whether the quote includes all nuts, bolts and other pieces in the intended assembly.
Swipe or scroll the table horizontally to read all columns on a small screen.
| Specification item | Recorded value |
|---|---|
| Model | C50 |
| Function | Join adjacent grating panels |
| Material options | Galvanized, SS304, SS316 or SS316L — confirm |
| Matching | Confirm mesh, depth and joint purpose; not a substitute for hold-down clips |
No automatic substitution is established. Panel-to-panel joining and panel-to-support restraint have different functions. Confirm the fixing design and each component of the assembly.

Supplied archive I0269. Mixed configurations are shown. The photograph does not establish a particular C25/C30/C38/C50 geometry, material grade or test specimen.
View in technical resourcesUse the model, drawing revision and tested conditions together. Missing files are not evidence of a verified specification.
Linked documents are catalogue references, not matched test reports. Request evidence for the proposed configuration where required.
L/M/C/J/G and related clips
Installation quantity, torque and loading require project review.
Applicant / publisher: MACHS (catalogue publisher) · Source: Document reference
Version: As issued; see original · Product catalogue — not a test report
Reference / method: Product reference · Issued: See original
Product and assembly reference only; no certification or tested load is established by this catalogue.
Read document scope and preview Download original (PDF)Installation planning checklistRequest missing or applicable files
Installation planning · Your buying path · Technical resources
Review the section, dimensions and evidence for each entry. A related product is not an interchangeable or approved substitute.
C25 grating joining clipC25 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.
C30 grating joining clipC30 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.
C38 grating joining clipC38 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.Selected product: C50 grating joining clip. This configuration is included with your enquiry.
State known conditions and write "not sure — please advise" for anything unresolved. No need to guess the resin or load.