MACHS

Clips & accessories

C25 grating joining clip

C25 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.

C-type panel-to-panel joining clip schematic from the MACHS legacy website
C-type joining-clip schematic from the MACHS legacy website. It explains the joint between adjacent panels; it is not a dimensioned C25 drawing or a test specimen photograph. Confirm clip geometry, fasteners and materials for the actual order.
← Clips & accessories

Specification notes

ModelC25
FunctionJoin adjacent grating panels
Material optionsGalvanized, SS304, SS316 or SS316L — confirm
MatchingConfirm mesh, depth and joint purpose; not a substitute for hold-down clips

Parameter source: P07 → P049 / V9 2026-11-05 / V8 R3. Only the listed configuration is described. Missing dimensions, mass and working loads are not estimated.

Is the task joining or holding down?

C-type clips join adjacent grating panels. If your task is fixing a panel to its supporting structure, ask for the appropriate hold-down arrangement instead of using a joining clip as a substitute.

Send the joint details

Identify the grating model, mesh, depth, edge/joint arrangement, access for installation and service exposure. Provide the material requirement, quantity and a joint sketch. Do not select a clip solely because its code contains a similar depth number.

Confirm the supplied assembly

Check the clip dimensions and which bolts, nuts or other parts are included against the applicable drawing or catalogue. Material options do not mean every option is held in stock or carries the same documentation.

Choose the joint before choosing the clip

Use a C-type joining clip when the requirement is to connect adjacent grating panels, subject to the actual joint detail. Attachment of a panel to a supporting member is a separate fixing task. Confirm both requirements in the installation drawing rather than expecting one clip type to perform both jobs.

Check the complete fit

Send the two panel edge details, mesh pitch and clear gap, panel depth, joint gap, underside access and proposed fastener arrangement. The C25/C30/C38/C50 designation alone is not a verified set of dimensions or proof that a clip fits a particular panel.

Specify materials and the installation schedule

State the required clip and fastener material and the exposure conditions. Agree the full assembly, quantities, fixing positions and installation instructions for the project. The catalogue illustrates clip families; it does not establish a universal torque, capacity or fixing interval.

What to send with the enquiry

Include the model code, quantity, photographs or a sketch of the joint, panel geometry, required metal grade and any installation standard. Mark uncertain dimensions for review. Ask whether the quote includes all nuts, bolts and other pieces in the intended assembly.

Swipe or scroll the table horizontally to read all columns on a small screen.

Recorded specification — C25 grating joining clip
Specification itemRecorded value
ModelC25
FunctionJoin adjacent grating panels
Material optionsGalvanized, SS304, SS316 or SS316L — confirm
MatchingConfirm mesh, depth and joint purpose; not a substitute for hold-down clips
Can this joining clip replace a support hold-down clip?

No automatic substitution is established. Panel-to-panel joining and panel-to-support restraint have different functions. Confirm the fixing design and each component of the assembly.

Files and media

Grating joining clips — supplied packing photograph

Supplied MACHS archive photograph of packed grating joining clips

Supplied archive I0269. Mixed configurations are shown. The photograph does not establish a particular C25/C30/C38/C50 geometry, material grade or test specimen.

Download image (JPG)

View in technical resources

Technical pack for this configuration

Use the model, drawing revision and tested conditions together. Missing files are not evidence of a verified specification.

Linked documents are catalogue references, not matched test reports. Request evidence for the proposed configuration where required.

MACHS clip catalogue

L/M/C/J/G and related clips

Installation quantity, torque and loading require project review.

Applicant / publisher: MACHS (catalogue publisher) · Source: Document reference

Version: As issued; see original · Product catalogue — not a test report

Reference / method: Product reference · Issued: See original

Product and assembly reference only; no certification or tested load is established by this catalogue.

Read document scope and preview Download original (PDF)

Installation planning checklistRequest missing or applicable files

Compare this configuration

Installation planning · Your buying path · Technical resources

Applications

Coordinate grating, framing, rails and connections.Plan industrial platforms and equipment accessCoordinate the component list, support and connection details, maintenance openings and responsibility for installation.

Selection guides

MACHS pultruded FRP grating panels in the workshop; representative family photograph, not a tested specimen identificationFrom a drawing to an agreed component supplyDefine the drawing revision, critical dimensions, machining and delivery boundary before comparing quotations.

Related products in this family

Review the section, dimensions and evidence for each entry. A related product is not an interchangeable or approved substitute.

C-type panel-to-panel joining clip schematic from the MACHS legacy websiteC30 grating joining clipC30 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.C-type panel-to-panel joining clip schematic from the MACHS legacy websiteC38 grating joining clipC38 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.C-type panel-to-panel joining clip schematic from the MACHS legacy websiteC50 grating joining clipC50 joining clip for adjacent FRP grating panels. Check mesh, panel depth and joint access, then send your panel layout and quantity to review the matching assembly. Not a hold-down clip.

Request specifications

Selected product: C25 grating joining clip. This configuration is included with your enquiry.

State known conditions and write "not sure — please advise" for anything unresolved. No need to guess the resin or load.

Privacy and enquiry data · What to include

Attach your drawing or specification and include its drawing number and revision in the requirements. You can also contact info@machsfrp.com.