Specify chemical-process access
Define the chemical exposure and the structural requirement separately, then match the proposed panel to its material evidence.
Describe the exposure before choosing a resin
Provide chemical or mixture names, concentrations, operating and peak temperatures, contact duration and whether exposure is immersion, splashing or intermittent. Add cleaning agents, washing cycles and unusual shutdown conditions.
Keep the geometry and material decisions separate
Mesh, depth and bar arrangement describe the panel geometry; resin and surface describe other parts of the configuration. A chemical-resistance report for one formulation is not proof for every resin option or every concentration and temperature.
Check the evidence and the system boundary
Use the resin guide and the original report for the actual sample. Send spans, loads, supports, connections and any process-specific access requirements for review. This application page does not claim that MACHS has delivered a named chemical installation or that one report certifies a complete structure.
Prepare a reviewable enquiry
Include the exposure schedule, layout/drawing revision, finished-part list and quantity. Identify the test method or customer specification required, destination and design/installation responsibilities. Mark unresolved conditions instead of selecting a grade by assumption.
Choose resin from the actual exposure
Read a load table with its support conditions
Compare grating quotations on the same basis
Review technical evidence · Send your project conditions
Relevant product families
38 × 38 × 38 mm moulded grating38 mm-deep moulded FRP grating with 38 × 38 mm mesh for walkway and platform selection. Compare resin and surface options, then send panel sizes and support conditions for quotation.
60.2 × 76.2 S38 grating panelS38 FRP grating with 60.2 × 76.2 mm pitch for industrial access selection. Check the recorded configuration and sample evidence, then send your panel sizes and support conditions.